Honda CBR650F Service Manual page 253

dummyhead dummyhead
CRANKCASE/TRANSMISSION
Apply locking agent to the shift drum bearing setting
washer-bolt [1] threads (page 1-17).
Install and tighten the shift drum bearing setting
washer-bolts to the specified torque.
TORQUE: 12 N·m (1.2 kgf·m, 9 lbf·ft)
Install the dowel pin [1] onto the upper crankcase hole.
Install the countershaft [2] by aligning the following:
– Set ring with the groove of the upper crankcase
– Bearing cap hole with the dowel pin
– Countershaft bearing stopper pin with the groove of
the upper crankcase
Assemble the crankcase halves (page 13-5).
13-12
[2]
Align
[1]
[1]
Align
Align