Honda CBR650F Service Manual page 227

dummyhead dummyhead
CLUTCH/GEARSHIFT LINKAGE/STARTER CLUTCH
Temporarily install the following:
– Starter idle gear [1]
– Starter idle gear shaft [2]
Insert the gear holder [3] between the starter idle gear
and driven gear as shown.
TOOL:
[3] Gear holder, M2.5
Remove the starter clutch mounting bolt [4] and washer
[5].
Remove the temporarily installed parts.
Remove the starter clutch outer assembly [1].
Remove the thrust washer [1].
DISASSEMBLY
Check the operation of the one-way clutch by turning
the driven gear [1].
You should be able to turn the driven gear clockwise
smoothly,
counterclockwise.
Remove the starter driven gear by turning it clockwise.
Remove the needle bearing [2].
11-14
07724-0010100
but the gear should
[1]
[2]
[1]
[1]
[1]
[2]
not turn
[3]
[4]/[5]