Ignition Switch - Honda CBR650F Service Manual

dummyhead dummyhead
REMOVAL/INSTALLATION
Remove the fuel pump unit (page 7-8).
Remove the screw [1], Black wire terminal [2] and
stopper [3].
Disconnect the Pink wire connector [4].
Release the wires from the guides [5] of the fuel pump
unit.
Press the tabs [6] and remove the fuel level sensor
assembly [7] from the fuel pump unit.
Installation is in the reverse order of the removal.
• When installing the fuel level sensor assembly, slide
it until tabs lock with a "CLICK".

IGNITION SWITCH

INSPECTION
Remove the following:
– Left middle cowl (page 2-10) (CBR650F/FA)
– Headlight assembly from the bottom bridge (page
21-3) (CB650F/FA)
Disconnect the ignition switch 2P (Brown) connector [1].
Check for continuity between the switch side 2P
(Brown) connector terminals in each switch position
according to the continuity chart.
– CBR650F/FA (page 23-2)
– CB650F/FA (page 23-3)
LIGHTS/METERS/SWITCHES
[5] [6]
[2]
[3]
[1]
[4]
CBR650F/FA:
CB650F/FA:
[1]
[7]
[1]
21-15