Honda CBR650F Service Manual page 239

dummyhead dummyhead
ALTERNATOR
Installation is in the reverse order of removal.
TORQUE:
Left crankcase cover bolt:
12 N·m (1.2 kgf·m, 9 lbf·ft)
• Apply
ThreeBond or an equivalent) to the mating areas
of crankcase cover and crankcase as shown.
Check the oil level (page 3-9).
Make sure there are no oil leaks.
STATOR
REMOVAL/INSTALLATION
Remove the left crankcase cover (page 12-3).
Remove and install the stator as following illustration.
Installation is in the reverse order of removal.
LEFT CRANKCASE COVER
12-4
sealant (TB1207B manufactured
ALTERNATOR STATOR BOLT
12 N·m (1.2 kgf·m, 9 lbf·ft)
STATOR
Cover side:
by
Crankcase side:
10 - 15 mm
(0.4 - 0.6 in)
10 - 15 mm
(0.4 - 0.6 in)
ALTERNATOR WIRE CLAMP BOLT
12 N·m (1.2 kgf·m, 9 lbf·ft)