Honda CBR650F Service Manual page 301

dummyhead dummyhead
FRONT WHEEL/SUSPENSION/STEERING
Pour the specified amount of recommended fork fluid
into the fork tube.
RECOMMENDED FORK FLUID:
Honda Ultra Cushion Oil 10W or equivalent
FORK FLUID CAPACITY:
CBR650F/FA: 505 ± 2.5 cm
CB650F/FA: 482 ± 2.5 cm
Slowly pump the fork tube several times to remove any
trapped air from the lower portion of the fork tube.
Compress the fork tube fully and measure the fluid level
[1] from the top end of the fork tube.
[1] FLUID LEVEL:
CBR650F/FA: 140 mm (5.5 in)
CB650F/FA: 128 mm (5.0 in)
Pull the fork pipe up and install the fork spring [1] with
the tightly wound coil side facing down.
Install the spring collar [2] with the stepped side facing
down.
Coat a new O-ring [1] with fork fluid and install it into the
groove in the fork cap [2].
Install the fork cap into the fork tube.
Tighten the fork cap
after installing the
fork tube into the
fork bridges.
16-24
3
(17.1 ± 0.08 US oz, 17.8 ± 0.09 Imp oz)
3
(16.3 ± 0.08 US oz, 17.0 ± 0.09 Imp oz)
[1]
Down
[1]
[2]
[1]
[2]