Fuel Injector - Honda CBR650F Service Manual

dummyhead dummyhead
FUEL SYSTEM
INSULATOR
REMOVAL/INSTALLATION
Remove the following:
– Throttle body (page 7-13)
– Cam chain tensioner lifter (page 10-20)
Loosen the band screws [1] and remove the insulators
[2].
Installation is in the reverse order of removal.
• Align the insulator grooves with the tabs of the
cylinder head.
• Tighten the insulator band screw until the band seat
on the collar (7 mm) [3], then tighten it to the
specified torque.
TORQUE:
Insulator band screw:
4.5 N·m (0.5 kgf·m, 3.3 lbf·ft)

FUEL INJECTOR

REMOVAL/INSTALLATION
Remove the air cleaner housing (page 7-12).
Disconnect the fuel injector 2P (Black) connectors [1]
Remove the following:
– Four bolts [2]
– Fuel rails/joint [3] and fuel injectors [4] (as an
assembly)
– Fuel injectors [1]
– Seal rings [2]
– O-rings [3]
7-16
[2]
[1]
[1]
[1]
Align
[1]
[3]
[2]
[1]
[1]
[3]
[2]
[2]
[1]
Align
[3]/[4]