Honda CBR650F Service Manual page 390

dummyhead dummyhead
CB650F/FA
Disconnect the connectors [1].
Remove the mounting bolt [2] and horn assembly [3].
Remove the collar [1], two rubber mounts [2] from the
horn [3].
Installation in the reverse order of removal.
TURN SIGNAL/HAZARD RELAY
• The hazard flasher system can be operated with the
ignition switch turned ON.
When the ignition switch is turned OFF with the
hazard flasher system operating, the system
continue operating.
RELAY CIRCUIT INSPECTION
Remove the ABS modulator cover (page 4-35).
Turn the ignition switch OFF.
Remove the turn signal/hazard relay [1] from the stay.
Disconnect the 4P connector.
Check the following at the wire harness side 4P
connector.
LIGHTS/METERS/SWITCHES
CB650F/FA:
[2]
Align
[3]
[2]
[1]
[1]
[3]
[1]
21-21