Honda CBR650F Service Manual page 293

dummyhead dummyhead
FRONT WHEEL/SUSPENSION/STEERING
DISASSEMBLY/ASSEMBLY
Disassemble and assemble the front wheel as following
illustration.
• Install each dust seal with the flat side facing out so
that it is flush with the wheel hub.
• Install the brake disc with the rotation mark (arrow)
facing out.
DISC BOLTS
42 N·m (4.3 kgf·m, 31 lbf·ft)
PULSER RING
(CBR650FA, CB650FA)
DUST SEAL
BEARING REPLACEMENT
Install the remover head [1] into the bearing.
From the opposite side of the wheel, install the bearing
remover shaft [2] and drive the bearing out of the wheel
hub.
TOOLS:
[1] Bearing remover head, 20 mm
[2] Bearing remover shaft
Remove the distance collar and drive out the other
bearing.
16-16
BRAKE DISC
BEARING (6204UU)
07746-0050600
07746-0050100
DISTANCE COLLAR
BEARING (6204UU)
BRAKE DISC
[1]
DUST SEAL
ROTATION MARK
(ARROW)
DISC BOLTS
42 N·m (4.3 kgf·m, 31 lbf·ft)
[2]