Honda CBR650F Service Manual page 163

dummyhead dummyhead
FUEL SYSTEM
Loosen the four insulator band screws (throttle body
side) [1].
Slide the throttle body assembly upward and release it
off of the insulators.
Disconnect the throttle cable A [1] from the throttle drum
and cable stay.
Installation is in the reverse order of removal.
• Tighten the insulator band screw [1] until the band
seats on the collar (9 mm) [2], then tighten it to the
specified torque.
TORQUE:
Insulator band screw:
4.5 N·m (0.5 kgf·m, 3.3 lbf·ft)
Throttle cable B lock nut:
5.5 N·m (0.6 kgf·m, 4.1 lbf·ft)
Adjust the throttle grip freeplay (page 3-4).
7-14
[1]
[1]
[1] [2]