Honda CBR650F Service Manual page 286

dummyhead dummyhead
Install the master cylinder [1] and holder [2] with the
Align the edge of
"UP" mark [3] facing up.
the master cylinder
with the punch
Tighten the upper bolt [4] first, then the lower bolt [5] to
mark on the
the specified torque.
handlebar.
TORQUE: 12 N·m (1.2 kgf·m, 9 lbf·ft)
Connect the brake light switch connectors [6].
Install the right handlebar weight (page 16-13).
Check the throttle grip freeplay (page 3-4).
REMOVAL (CB650F/FA)
Remove the following:
– Rearview mirrors (page 2-6)
– Handlebar weights (page 16-13)
– Wire bands [1]
– Clutch switch connectors [1]
– Two bolts [2]
– Bracket holder [3]
– Clutch lever bracket [4]
– Two screws [1]
– Left handlebar switch housing [2]
FRONT WHEEL/SUSPENSION/STEERING
[1] Align
[6]
[3]
[2]
[2]
[2]
[4]
[3]
[5]
[1]
[4]
[1]
[1]
16-9