Honda CBR650F Service Manual page 53

dummyhead dummyhead
FRAME/BODY PANELS/EXHAUST SYSTEM
CB650F/FA
Slide the boot [1] off from the lock nut [2].
Loosen the lock nut (left-hand threads) and remove the
rearview mirror [3].
Remove the mirror adaptor [4].
Installation is in the reverse order of removal.
TORQUE:
Rearview mirror lock nut:
20 N·m (2.0 kgf·m, 15 lbf·ft)
Rearview mirror adaptor:
20 N·m (2.0 kgf·m, 15 lbf·ft)
HEADLIGHT ASSEMBLY
HEADLIGHT ASSEMBLY REMOVAL/
INSTALLATION
CBR650F/FA
Remove the following:
– Rearview mirror (page 2-5)
– Upper cowls A (page 2-9)
Support the headlight assembly [1] securely and
remove the three washer bolts [2].
Disconnect the headlight 3P (Black) connector [3].
Release the front position light 4P (Black) connector [4]
from the stay and disconnect it
Installation is in the reverse order of removal.
• Align the headlight boss with the hole of the stay.
CB650F/FA
Remove the tank shroud B (page 2-11).
Release the following connectors from the stay and
disconnect them:
– Front sub harness 12P (Black) [1]
– Front sub harness 6P (Black) [2]
– Front sub harness 4P (Black) [3]
– Front sub harness 2P (Brown) [4]
Release the wire clip [5].
2-6
CB650F/FA: [3]
[1]
[2]
[4]
Align
[3]
[4]
[1]
[2]
[5]
[1]
[2]
[3]
[4]