Ignition Coil - Honda CBR650F Service Manual

dummyhead dummyhead
IGNITION SYSTEM

IGNITION COIL

REMOVAL/INSTALLATION
Disconnect the spark plug caps (page 3-6).
Remove the bolt [1] and release the ignition coil stay
assembly [2] from the frame.
Release the wire clamp [1].
Disconnect the ignition coil wire connectors [2]
Remove the bolts [3], spacers [4] and No.1/No.4
ignition coil [5].
Release the wire clip [1].
Disconnect the ignition coil wire connectors [2]
Remove the bolts [3], spacers [4] and No.2/No.3
ignition coil [5].
Installation is in the reverse order of removal.
• Do not interchange the ignition coils.
CKP SENSOR
REMOVAL/INSTALLATION
Remove the right crankcase cover (page 11-4).
Remove the CKP sensor wire clamp bolts [1] and wire
clamp [2].
Remove the wire grommet [3] from the right crankcase
cover.
Remove the CKP sensor mounting bolts [4] and CKP
sensor [5].
Installation is in the reverse order of removal.
• Apply locking agent to the CKP sensor wire clamp
bolt threads (page 1-17).
• Apply
ThreeBond or an equivalent) to the wire grommet
seating surface.
5-8
sealant (TB1207B manufactured
CBR650FA shown:
[2]
No.1/No. 4:
[1]
[3]/[4]
No.2/No. 3:
[1]
[3]/[4]
[2] (Black)
[1]
by
[3]
[1]
[5] [2] (Green/blue)
[2] (Black)
[5]
[2] (Green/white)
[5]
[2]
[4]