Honda CBR650F Service Manual page 65

dummyhead dummyhead
FRAME/BODY PANELS/EXHAUST SYSTEM
FOOTPEG BRACKET
REMOVAL/INSTALLATION
• For right rider footpeg bracket removal/installation,
refer to following:
– Brake pedal (page 18-15)
– Rear master cylinder (page 18-10)
LEFT RIDER FOOTPEG BRACKET
Remove the two bolts [1] and footpeg bracket [2].
Installation is in the reverse order of removal.
TORQUE:
Rider footpeg bracket bolt:
37 N·m (3.8 kgf·m, 27 lbf·ft)
PASSENGER FOOTPEG BRACKET
Remove the two bolts [1] and footpeg bracket [2].
Installation is in the reverse order of removal.
TORQUE:
Passenger footpeg bracket bolt:
27 N·m (2.8 kgf·m, 20 lbf·ft)
EXHAUST PIPE/MUFFLER
REMOVAL/INSTALLATION
Remove the drive sprocket cover (page 2-16).
Pull down the radiator (page 8-7).
Disconnect the O
remove the O
2-18
sensor 4P (Black) connector [1] and
2
sensor wire [2] out of the frame.
2
[1]
[1]
[2]
[2]
[1]
[2]