Honda CBR650F Service Manual page 290

dummyhead dummyhead
Secure the wires with the wire bands [1].
Install the following:
– Handlebar weights (page 16-13)
– Rearview mirrors (page 2-6)
Check the following:
– Clutch lever freeplay (page 3-20)
– Throttle grip freeplay (page 3-4)
HANDLEBAR WEIGHT REMOVAL/
INSTALLATION
Hold the handlebar weight [1] and remove the
handlebar weight mounting screw [2], then remove both
handlebar weights.
Install the handlebar weight to the handlebar by aligning
each cutout.
Hold the handlebar weight.
Install and tighten the handlebar weight mounting screw
securely.
HANDLEBAR INNER WEIGHT
REPLACEMENT
CBR650F/FA
Remove the left handlebar grip and throttle grip (page
16-14).
Straighten the retainer tab [1] with a screwdriver or
punch.
Temporarily install the handlebar weight [3] with the
Apply soapy water
screw [4], aligning the flats, and then remove the inner
through the tab
weight [5] by turning the handlebar weight.
locking hole [2] for
easy removal.
Remove the following from the from the inner weight:
– Screw
– Handlebar weight
– Weight retainer [6]
– Rubber cushions [7]
Install the rubber cushions and a new retainer onto the
inner weight, aligning the retainer inner tabs with the
cushion slit.
Temporarily install the handlebar weight with the screw,
aligning the flats.
Insert the weight assembly into the handlebar. Turn the
handlebar weight and hook the retainer tab with the
hole in the handlebar to secure the inner weight.
Remove the screw while holding the handlebar weight
securely.
Install the left handlebar grip and throttle grip (page 16-
14).
FRONT WHEEL/SUSPENSION/STEERING
CBR650F/FA shown:
[1]
[5]
[7]
[1]
Align
[2]
[1]
[2]
[4]
[3]
[6]
16-13