Honda CBR650F Service Manual page 180

dummyhead dummyhead
RADIATOR/COOLING FAN
PULL DOWN THE RADIATOR
• Perform this procedure, before removing the
following:
– Radiator (page 8-7)
– Exhaust pipe/muffler (page 2-18)
Remove the following:
– Middle cowls (page 2-10) (CBR650F/FA)
– Tank shroud A (page 2-10) (CB650F/FA)
Remove the following:
– Radiator lower mounting bolt [1]
– Radiator lower stay mounting bolt [2]
– Radiator lower stay [3]
Remove the radiator upper mounting bolt [4] and
release the radiator mounting rubber [5] from the boss
[6] of the frame.
Pull off the heat guard rubber [7] and pull down the
radiator [8].
Installation is in the reverse order of removal.
REMOVAL/INSTALLATION
Drain the coolant (page 8-4).
Pull down the radiator (page 8-7).
Release the fan motor 2P (Black) connector [1] from the
stay and disconnect it.
COOLING SYSTEM
[6] [7]
[5]
[2] [3]
CBR650F/FA:
[1]
CB650F/FA:
[1]
[4]
[8]
[1]
8-7