Honda CBR650F Service Manual page 245

dummyhead dummyhead
CRANKCASE/TRANSMISSION
CRANKCASE
SEPARATION
Refer to Service Information for removal of necessary
parts before separating the crankcase (page 13-2).
Remove the crankcase 6 x 50 mm bolt [1] on the upper
side of the crankcase.
Remove the bolt [2] and wire stay [3] on the lower side
of the crankcase.
Place the engine upside down.
Loosen the following in a crisscross pattern in 2 or 3
steps:
– 10 mm bolt [1]
– 8 mm bolt [2]
– Five 6 x 50 mm bolts [3]
– Eight 6 x 35 mm bolts [4]
Remove the all bolts.
Loosen the crankcase main journal bolt [1] in a
crisscross pattern in 2 or 3 steps, and remove them.
Separate the lower crankcase from the upper
Do not pry the
crankcase.
crankcase halves
with a screwdriver.
Remove the dowel pins [1] and oil orifices [2].
13-4
[1]
[1]
[2]
[2]
[2]/[3]
[3]
[4]
[1]
[1]