Honda CBR650F Service Manual page 326

dummyhead dummyhead
BRAKE FLUID REPLACEMENT/AIR
BLEEDING
BRAKE FLUID DRAINING
Turn the handlebar so the reservoir is level.
For front brake:
Remove the following:
– Two screws [1]
– Reservoir cap [2]
– Set plate [3]
– Diaphragm [4]
Loosen the stay bolt [1].
For rear brake:
Slightly pull the reservoir [2] upward and turn it
counterclockwise.
Align the groove with the tab, then temporarily tighten
the reservoir stay bolt.
Remove the following:
Take care not to
spill the fluid out of
– Two screws [3]
the reservoir.
– Reservoir cap [4]
– Set plate [5]
– Diaphragm [6]
Connect a bleed hose [1] to the caliper bleed valve [2].
Loosen the bleed valve and pump the brake lever or
pedal until no more fluid flows out of the bleed valve.
Close the bleed valve.
HYDRAULIC BRAKE
[1]
[2]
[2]
[1]
Front: Rear:
[1]
[2]
[3]
[4]
Align
[3]
[4]
[5]
[6]
[1]
[2]
18-5