Honda CBR650F Service Manual page 201

dummyhead dummyhead
CYLINDER HEAD/VALVES
INSTALLATION
Apply molybdenum oil solution to the outer surface of
each valve lifter [1].
Install the shims [2] on the retainers and valve lifters
Install the shims
into the valve lifter bores.
and valve lifters in
their original
locations.
Each camshaft has an identification mark.
• "IN" mark [1]: Intake camshaft
• "EX" mark [2]: Exhaust camshaft
If the cam sprockets are removed, install the cam
sprockets onto the camshafts.
• Install the intake cam sprocket [1] with the timing
mark (IN) facing outward and the No.1 cam lobes [2]
facing up and out as shown.
• Install the exhaust cam sprocket [3] with the timing
mark (EX) facing outward and the No.1 cam lobes
[4] facing up and out as shown.
Clean and apply a locking agent to the cam sprocket
bolt threads.
Install the cam sprocket bolts [5].
Rotate the crankshaft clockwise slowly and align the "T"
mark [1] with the index notch [2] in the crankcase cover.
10-8
[2]
[1]
[2]
[5]
[1]
[2]
[1]
[2]
[4]
[3]
[1]