Honda CBR650F Service Manual page 404

dummyhead dummyhead
Disconnect the ECM 33P (Gray) connector (page 4-35).
Check for continuity between the ECM 33P (Gray)
connector [1] and immobilizer receiver 4P (Black)
connector [2] terminals of the wire harness side.
TOOL:
Test probe
CONNECTION: Blue – Blue
There should be continuity.
Check for continuity between the ECM 33P (Black)
connector [1] terminal of the wire harness side and
ground.
TOOL:
Test probe
CONNECTION: Blue – Ground
There should be no continuity.
REMOVAL/INSTALLATION
Remove the top bridge (page 16-25).
Remove the following:
– Protector [1]
– Two screws [2]
– Immobilizer receiver [3]
Install the immobilizer receiver in the reverse order of
removal.
• Apply locking agent to the screw threads.
• Route the immobilizer receiver wire into the left
groove [4] in the protector.
Install the top bridge (page 16-28).
[2]
07ZAJ-RDJA110
07ZAJ-RDJA110
CBR650F/FA shown:
[1]
IMMOBILIZER SYSTEM (HISS)
Bu
Bu
Bu
[4]
[2]
[1]
[1]
[3]
22-11