Omron FH-1 series User Manual page 73

Setting Methods
 Rectangle
• Image selection status
Points are displayed at
each of the four corners.
• Using numbers for setting
The setting area consists of two windows below. Click the [1] or [2] on the right side of the window to
select the setting item.
 Line
• Image selection status
Points are displayed at the
starting point, ending point,
and mid point of lines.
• Example) When changing the oblique direction
Drag a point in the direction the line is to be changed.
• Using numbers for setting
The setting area consists of two windows below. Click the [1] or [2] on the right side of the window to
select the setting item.
Vision System FH/FHV/FZ5 Series User's Manual (Z365)
• Dimension Adjustment
• Dimension Adjustment
Drag the points.
3 Basic Operations
• Example) When enlarg-
ing
Drag the lower right point
down in a diagonal direc-
tion.
• Example) When changing
the length of a line
Drag the points toward the
intended direction.
• Example) When chang-
ing the line width
Drag the center point of
the line in a direction per-
pendicular to the line.
3 - 17
3