Omron FH-1 series User Manual page 278

6 Performing Measurement and Adjustment
Setting item
Data No.
Calibration data
Graphic display
area
Point
Calib. X/Y-axis
Data Interval
Origin interval
If cameras are arranged above, the position of the camera 0/1 are displayed on the area as similar as
the actual camera position. If not, then re-calibrate it.
Calibration succeeded
6 - 48
Setting value
[Factory default]
0 to the number of data
that the selected unit is
held.
• [Unchecked]
• Checked
-99999.9999~99999.9999
0 to 7
[0.000000]
Description
Sets a calibration data number to display.
Displays calibration data for graphical display target.
Graphically displays a camera coordinate system and a real coordi-
nate system. When the Point is effective, the real coordinate X/Y is
updated when clicking the area.
Displays the real coordinate data by pointing a point on the area.
When the Point is checked, the point coordinate setting is effective.
Sets X/Y coordinates for the cursor to be displayed on the area.
Sets two data numbers to calculate the origin interval distance
between the data.
Displays the calculated distance above.
Calibration failed
Vision System FH/FHV/FZ5 Series User's Manual (Z365)