Omron FH-1 series User Manual page 161

4
Set the error operation on the Error Setting area.
Setting item
Error Type
ERROR Sig-
nal Output
Display Type
Additional Information
A dialog is displayed when [Dialog Box (Clear ERROR Signal)] occurs. Show an example when
a logging error of Line 0 occurs. Click [OK] to close the dialog.
Vision System FH/FHV/FZ5 Series User's Manual (Z365)
Setting value
[Factory default]
― Displays the Error No, and Error Type selected on the Error select
window.
• [ON] Select the Radio button to output the error signal when selected
Error Type occurs.
• OFF
Select the notification or operation of error when specified error
type occurs.
The default operation differs by the error type.
• No Error Notification Do not display any error notification on the window when the
selected Error Type occurs.
• Send Error Notification
No Error Notification:
• Dialog Box
Displays the error information on the Information Pane when the
• Dialog Box
selected Error Type occurs.
(Clear ERROR Signal)
Send Error Notification:
This [Send Error Notification] operation is limited to only Logging
Error and PLC Link Error. For other error types, the display opera-
tion follows the setting of [Dialog Box].
For Information Pane, refer to the Main Window 8-2-1 Main Window
(Layout 0): Adjustment Window (Default) on page 8-11.
Dialog Box:
Displays the error information on the window when the selected
Error Type occurs. When you select [ON] in [ERROR Signal Out-
put], the error output remains on even if you close the dialog box.
Dialog Box (Clear ERROR Signal):
Displays the error information on the window as a dialog box when
the selected Error Type occurs. When you select [ON] in [ERROR
Signal Output], the error output is turned OFF when you close the
dialog box.
4 Setting the Controller
Description
4
4 - 63