Appendices
Edge Level
Indicates the edge color change level (degree of color difference). This level is adjusted if edges cannot
be accurately detected.
Additional Information
The value 0 to 100 for the edge level indicates the edge intensity. It is not related to color differ-
ence in the original images.
• For case of measurement using relative position (%) with regards to width of color difference
The edges are detected in the following manner.
1
Calculate the overall distribution of color difference in the measurement region.
2
Min. color difference value: 0%; Max. color difference value: 100%
3
Locations in which there is an edge level color difference are detected as edges.
• Edge Position
Measurement
region
• Edge Pitch
Example)
100%
20%
0%
20%
100%
• When performing measurement using color difference value
Edge level is set using color difference absolute value.
Measurement region
A - 16
Max. color difference
100%
Edge level
50%
0%
Min. color difference
Measurement area
Edge level
Edge level
1
Noise
50
0
Edge level (absolute value)
Vision System FH/FHV/FZ5 Series User's Manual (Z365)