Omron FH-1 series User Manual page 153

Parameter
Share name
Shared folder
Username
Password
4
Click [Apply].
Edited information is saved to the Sensor Controller.
It's information will be available with restarting Sensor Controller.
Important
Click [Apply] after saving or reading of Network drive. If you click it while Network drive is run-
ning, Network drive's file could be given a damage.
Important
• If images and data are logged to a network drive, the use of the multi-input function and other
heavy measurement loads on the Controller may slow down communications and cause log-
ging errors. In this case, set the measurement takt time so that there is some leeway.
• If many drives are set as network drives, it may require a greater amount of time to start the
Controller.
• Do not pull out the LAN cable while the Controller is accessing the network drives.
• Start the Controller when the network drives are ready. Connections cannot be established if
the network drives are not ready when the Controller is started.
• If there is no access to a network drive for a certain amount of time, the connection will be
automatically cut off depending on the network drive setting at the connection target. Make
sure that the setting at the connection target is not set to automatic disconnection.
• Dates and Times of the Updates of the Files Created at Network Logging
If the time zone of the external device is different from the time zone setting of the Controller
[GMT-08:00 Pacific Time (US & Canada): Do not automatically adjust clock for Daylight Sav-
ing Time], the date and time actually written may be different from the date and time of the file
update. Adjust the time zone of the external device to match that of the Controller.
Vision System FH/FHV/FZ5 Series User's Manual (Z365)
Set value
[Factory default]
S,T,U,V,W,X,Y,Z This is the name to be recognized by the Controller as a network
drive. Only 1 unit can be connected.
For FZ5-L series/FZ5-600 series, the shared name is displayed in
the Network folder.
For FH series/FZ5-800/1100/1200 series, a drive letter such as E:,
F:, G:, or H: is displayed.
(Example) For network Drive S, the following drive names are used
to access communication commands, macro programs, and so on.
• FZ5-L Series FZ5-600 series: /Network/S/
• FH series/FZ5-800/1100/1200 series: S:/
Specify the shared folder name.
Create a folder in advance on a computer that has a DNS resolved
name on the network, and specify this as the shared folder name.
---
For example, if the host name (computer name) is VISION and the
shared name is COMMON, specify a name such as
\\VISION\COMMON.
--- Enter the user name and the password to access the network
drive.
---
If you do not know the user name or the password, contact the
device network administrator.
4 Setting the Controller
Description
4
4 - 55