Omron FH-1 series User Manual page 190

5 Creating Measurement Scenes
Moving a Processing Unit
1
Display the Edit flow tab screen for the scene to edit.
For more details, refer to 5-5-1 Edit Flow Screen on page 5-14.
2
On the Edit flow tab screen, select a processing unit on the Unit list (flow) to move.
3
In the Edit flow button area, click
The selected processing unit will move one position up from the current position.
When clicking
position.
Additional Information
The following operation also enables processing units to move.
• Click [Move up] or [Move down] from [Edit flow] in the Menu bar.
• Drag a processing unit on the Unit list (flow) and drop it on the specified position on the Unit
list (flow).
• Right-click a processing unit on the Unit list (flow) and then click [Move up] or [Move down]
on the displayed shortcut menu.
Additional Information
When attempting to move a processing unit to the processing unit number 0, a warning dialog
will be displayed.
Copying/Pasting a Processing Unit
1
Display the Edit flow tab screen for the scene to edit.
For more details, refer to 5-5-1 Edit Flow Screen on page 5-14.
2
On the Edit flow tab screen, select a processing unit on the Unit list (flow) to copy.
3
In the Edit flow button area, click
Copy the selected processing item while holding data and variables being used.
Additional Information
The following operation also enables processing units to be copied.
• Click [Copy] from [Edit flow] in the Menu bar.
• Right-click a processing unit on the Unit list (flow) and then click [Copy] on the displayed
shortcut menu.
4
On the unit list (flow), select a position to paste.
5
In the Edit flow button area, click
The copied processing unit is inserted to the selected position on the Unit list (flow) while hold-
ing the setting data and variables being used.
5 - 28
[Move up].
[Move down], the selected one will move one position down from the current
[Copy].
[Paste].
Vision System FH/FHV/FZ5 Series User's Manual (Z365)