Omron FH-1 series User Manual page 316

8 Setting Windows
 Common Operations for Window Parts
• Click inside a window part and drag it to change its position.
• Click the outer edge of a window part and drag it to change the size of the part.
For FZ5, drag the icon in the lower right corner of a window part.
• Click the
dialog box for that part.
• The grid line is displayed when you set Alignment.
Each window part can have its size and position adjusted using the grid.
 Adding Window Parts
1
Click [Layout] in the menu or right-click and select [Addition of window parts] from the dropdown
menu or shortcut menu displayed. "Addition of window parts" dialog box is displayed.
2
Select a window part to add.
3
Click [OK].
The selected window part is added to the window.
 Deleting Window Parts
1
Select a window part to delete.
• For FH series/FZ5-800/1100/1200 series
2
Click [Layout] in the menu or right-click on the window part and select [Delete the window] from
the drop down menu or shortcut menu displayed.
The selected window part is deleted.
• For FZ-5L series/FZ5-600 series
3
Click
8 - 22
icon that appears on the upper right corner of any window part to open the settings
in the upper right corner of the window part. The selected window part is deleted.
Vision System FH/FHV/FZ5 Series User's Manual (Z365)