Omron FH-1 series User Manual page 349

Setting item
Text & Font Setting
Text Setting
Data Type
Text Data Ident
Data Type
(Selected)
Text Data
(Selected)
Font Setting
Size
Style
Color Setting
Initial Setting
Initial Status
Important
• In [Display mode], there are the following restrictions when [Modeless] is selected.
In dialog scene settings, you can not switch between scenes.
If a custom dialog is started up while displaying another dialog, performing measurement , or
performing communication commands, an error dialog will be displayed and cancel the cur-
rent processing.
• Set subroutine name to specify in [Macro processing (scene macro)] in accordance with the
following rules.
*+[Single-byte alphabetical character]+[Single-byte alphanumeric character and _ (under-
score)]
Example: *MEASUREDISP
• In [Control], if using a macro RaiseOptionEvent to operate, then specify the control command
in the event number, and the control parameters in the parameter.
Vision System FH/FHV/FZ5 Series User's Manual (Z365)
Setting value
[Factory default]
Displays the setting contents for [Text Setting], [Font Setting],
and [Color Setting].
Sets character data to display.
• [Direct input] Sets text data to display on the button.
• Variable
Direct input: Directly input to the [Text Data].
Variable:
[Blank] Specifies text data to display on the button using up to 128
characters.
• [Direct input] Sets text data to display at the button selection.
• Variable
Direct input: Directly input to the [Text Data].
Variable:
0 to 128 characters Specifies text data to display at the button selection using up to
128 characters.
Sets the display font.
[Blank] Sets the font size.
• Bold Sets the font style.
• Italic
Check the box to set desired style.
• Underline
• Strikeout
• [Fore Color] Sets the font color, background color, and the background color
at selection.
• Back Color
Fore Color: Set the character color.
• Select Color
Back Color: Set the button color in normal state.
R: 0 to 255 [16]
Select Color:Set the button color in selection state.
G: 0 to 255 [16]
B: 0 to 255 [16]
Sets the startup default conditions for the custom dialog display
buttons.
[Active] Sets the button operation enabled or disabled when starting up
the sensor controller.
Inactive
8 Setting Windows
Description
Specify a system variable or a scene variable of
character string type that defines a character
string to display.
Specify a system variable or a scene variable of
character string type that defines a character
string to display.
8
8 - 55