Omron FH-1 series User Manual page 245

Additional Information
If logging errors occur, please check the following.
• Is the LAN cable connected properly?
• Are the destination server settings in system settings correctly set?
• Did you use any character other than single-byte alphanumeric characters for the file names
or folder names?
• Did you use the following symbols as the file or folder names?
Measurement ID: measurement time YYYY-MM-DD_HH-MM-SS-XXXX
(YYYY: Calendar, MM: Month, DD: Day, HH: Hour, MM: Minute, SS: Second, XXXX: Millisec-
ond and Line number)
Example
Measurement time: 11:10:25.500 AM, December 24, 2007 and Line 0, the measurement ID is
"2007-12-24_11-10-25-5000".
Since the file name of the logging image also includes the same measurement ID, confirmation
of the measurement data and image data can be performed with the measurement ID.
7
Select the file type.
Set the file type to save image files.
Refer to A-6 Image file on page A-20.
Setting item
File type
Quality
Important
• If you save as BMP(BFZ)format /JPG(JFZ) format, the handling for the area outside the
image differs from the IFZ file format and emphasizes ease of display. If you want to perfectly
reproduce the measurement processing, including error processing on the outside part of the
image, save it as IFZ file format.
• Do not change the name of any BMP/Jpeg included in the BMP(BFZ) file/JPG(JFZ) file type.
Measurement may fail on this file type when loaded.
• If there are camera image input numbers for the BMP format files included in the BMP(BFZ)/
JPG(JFZ) file type that are out of sequence, measurement will not be done on images after
the first out of sequence number.
• JPG(JFZ) format can be read and measured with sensor controller software version 5.71 or
later. Since it is an irreversible compression image format, the measurement result differs
from IFZ format, or BMP(BFZ) format.
Vision System FH/FHV/FZ5 Series User's Manual (Z365)
6 Performing Measurement and Adjustment
Set value
[Factory default]
• [IFZ]
• BMP(BFZ)
• JPG(JFZ)
0 to [100]
¥
/ : , ; * ? " < > |
Description
Select the file type to save images for Logging.
• IFZ: Save as an OMRON image logging file format for
use with FH/FZ series, or FQ series.
• BMP (BFZ): Save as a container format image logging
file that includes BMP format image files.
• JPG (JFZ): Jpeg format image files are organized in
folders when saved as a logging image file format.
Image quality settings for saving as JPG (JFZ).
6
6 - 15