Omron FH-1 series User Manual page 48

1 Overview
*6. Operation mode tab is not displayed.
*7. Parallel processing tub is not displayed.
*8. Depending on the number of camera port of Sensor Controller.
*9. Enable only STEP 0 to 2.
*10.Enable only STEP 0.
*11. Enable only DSA 0 to 2.
*12.Enable only DSA 0.
*13.Disable to set. RS-422 is not supported.
*14.Supported only the Sensor Controller has 2 port: FH--10, FH--20
*15.Enable to set only 1 Sensor Controller under network.
1 - 6
Vision System FH/FHV/FZ5 Series User's Manual (Z365)