1 Overview
Procedure
↓
Scene Editing
↓
Testing
↓
Measuring
(Operation)
↓
Management
and Analysis
1 - 8
Description
In the Main Window (layout 0), edit the mea-
surement flow.
• Register processing items.
• Set the properties for each processing item.
↓
Click the [Data save] button.
Execute test measurements.
(In the Main Window (layout 0), click the [Mea-
sure] button.)
↓
Adjust the parameters for each processing item. Vision System FH/FHV/FZ5 Series Process-
↓
Click the [Data save] button.
In the Main Window (layout 0), click the [Switch
layout] button, and then select [Main Window
(Layout 1)].
↓
In the Main Window (layout 1), check the com-
munications with the PLC.
↓
In the Main Window (layout 1), execute com-
mands from the PLC, such as measurement
trigger commands.
Save and analyze measurement data and
images.
Reference
Refer to Section 5 Creating Measurement
.
Scenes on page 5-1
Refer to 9-2 Saving Settings Data to the
Flash Memory on page 9-7
Refer to 6-1 Executing Test Measurements
.
on page 6-3
ing Item Function
Reference Manual (Cat. No. Z341)
Refer to 9-2 Saving Settings Data to the
Flash Memory on page 9-7
Refer to Section 6 Performing Measurement
and Adjustment on page 6-1
Vision System FH/FHV/FZ5 Series User's
Manual for Communications
Settings (Cat. No. Z342)
Vision System FH/FHV/FZ5 Series User's
Manual for Communications
Settings (Cat. No. Z342)
Refer to 6-5 Analyzing Inspection and Mea-
surement Results [NG Analyzer] on page 6-
.
29
Refer to Section 9 Saving/Loading Data on
.
page 9-1
Vision System FH/FHV/FZ5 Series User's Manual (Z365)
.
.
.