Omron FH-1 series User Manual page 247

 Multiple image logging is [OFF]
• Saves the latest input image of camera. Specifically, two images, Input2_Camera0 and Input2_-
Camera1, are saved.
 Multiple image logging is [ON]
• Saves all of the transferred input images at the camera input. Specifically, six images,
• Saves the latest input image of camera. Specifically, two images, Input2_Camera0 and Input2_-
Camera1, are saved.
Important
Multiple image logging is [ON]
• Processing time will be long when parallel is [OFF] because all of the transferred images are
saved.
• Some latest images exceeds the memory size will be deleted because all of the transferred
images are temporarily saved to the Sensor Controller.
9
Set the image logging priority conditions.
When the measurement takt time is short, a time lag may occur in writing from the Controller
memory (RAM) to the RAM disk in the Controller and a temporary lack of available space in the
Controller memory may occur. Select whether logging or measurement has priority at these
times.
Parameter
Logging priority
Additional Information
To save all images that are logged, set the operation mode of the Sensor Controller to [Stan-
dard] (Operation Mode) and the Logging setting (logging condition) to [Logging]. At the same
time, select [Tool] − [System Settings] − [Startup], and turn OFF [Parallel execute] under the
operation mode In the startup settings.
Vision System FH/FHV/FZ5 Series User's Manual (Z365)
Set value [Factory
default]
[Logging]
Measurement
6 Performing Measurement and Adjustment
Description
Image logging is prioritized over the following measurement.
If overwriting of measurement images as logging images in the
Controller memory (RAM) is not available, measurement is
continued until it becomes available. When overwriting
becomes available, the next measurement trigger can be
accepted.
Starting measurement is prioritized over image logging.
If overwriting of measurement images as logging images in the
Controller memory (RAM) is not available, the measurement
image is discarded, and the next measurement trigger is
accepted.
6
6 - 17