Omron FH-1 series User Manual page 371

Setting item
Unit label
Target data No.
[Data reference]
button
Data ident
Ident 0
Ident 1
Scene variable
System variable
Decimal digits
Max value
Min value
Vision System FH/FHV/FZ5 Series User's Manual (Z365)
Setting value
[Factory default]
• [Unchecked]
• Checked
0 to 4
[4]
−999999.9999 to
999999.9999
[999999.9999]
−999999.9999 to
999999.9999
[−999999.9999]
Description
This is available when [Unit data (No.)] or [Unit data (ident)] is
selected in the "Data Type".
Sets when [Unit data (No.)] or [Unit data (ident)] is selected in
the "Data Type".
When using the unit label to specify the unit to be the target for
the numeric setting, select this and set the unit label.
This is available when [Unit data (No.)] is selected in the "Data
Type".
Specifies the data to be the target for the numeric setting.
Enter the data number for the unit that is specified by the "Tar-
get unit No.".
This is available when [Unit data (No.)] is selected in the "Data
Type".
You can select the data number directly to enter it, or you can
enter it with the [Data reference] button.
Click the [Data reference] button to select the target data in the
[Data reference] dialog box.
Sets when [Unit data (ident)] is selected in the "Data Type".
Use the unit data (identifier name) to specify the unit to be the
target for the numeric setting.
These are available when [System data] is selected in the
"Data Type".
Specifies the system data to be the target for the numeric set-
ting using the identifier information 0 and identifier information
1.
(Refer to the Vision System FH/FZ5 Series Macro Customize
Functions Programming Manual (Cat No. Z367-E1) system
data list.)
This is available when [Scene variable)] is selected in the "Data
Type".
Specifies the scene variable to be the target for the numeric
setting using the scene variable name.
This is available when [System variable)] is selected in the
"Data Type".
Specifies the system variable to be the target for the numeric
setting using the system variable name.
Enter the number of digits after the decimal place that can be
entered by the numeric setting.
Enter the maximum value that can be entered with the numeric
setting.
Enter the minimum value that can be entered with the numeric
setting.
8 Setting Windows
8 - 77
8