Omron FH-1 series User Manual page 166

5 Creating Measurement Scenes
Example: Adding Position Compensation for Two Measurement Objects in the Same Field of View
Example: Determining the Product Type from the Image and Branching Later Inspection Conditions
According to the Product Type (Branch Processing)
Product
type 2
Product
type 1
3
Check for defects in
product type (1).
4
5 - 4
START
0
Capture image from Camera.
1
Identify the shape.
2
Perform position compensation
for measurement object (1).
3
Check for defects in measure-
ment object (1).
4
Return the image that was moved with the Position
Compensation processing item to its original position.
5
Perform position compensation
for measurement object (2).
6
Check for defects in measure-
ment object (2).
7
Output the judgement result to
an external device
END
START
0
Capture image from Camera.
1
Detect the product type.
2
Use different measurement conditions
according to the product type.
5
Check for defects
in product type (2).
6
END END
Visual Representation
Visual Representation
Vision System FH/FHV/FZ5 Series User's Manual (Z365)