Omron FH-1 series User Manual page 384

9 Saving/Loading Data
The following table shows the data that is retained or cleared and the data that is saved when the
power supply is turned OFF.
Saving area
Sensor Flash memory of the
Control- Controller
ler
Controller memory
(RAM)
RAM disk
External USB memory
storage
SD memory card
microSD card
Shared folder on a
computer connected
to the network
*1. If images are being logged by the system, select [Other] − [Logging setting] under the System Settings and set
the destination for logged images to [Save to memory].
*2. If images are being logged by the system, select [Other] − [Logging setting] under the System Settings and set
the destination for logged images to [Save to memory + file].
Important
During data transfer, do not turn OFF the power supply.
• When a message indicating that processing such as saving or loading is in progress is dis-
played, do not restart the Controller or turn OFF the power supply. Data will be corrupted and
the system will not work properly at the next startup.
• Do not remove external storage devices while data is being saved or loaded. The operation
of the Controller may corrupt the data or external storage.
• Do not change the file name extension of saved files. If you change the extension, the file
cannot be loaded as setting data. In addition, if setting data in which the extension was
changed is loaded, the system may not work properly later.
• Depending on the settings, saving may fail due to insufficient external storage space. If sav-
ing fails and the error message "Please check" appears, check to see if there is unnecessary
data in the external storage and save the data after the unnecessary data has been deleted.
• The file system supported by USB memory or SD memory card differ by the Sensor Control-
ler.
Format USB memory or SD memory card according to the Sensor Controller series.
FH/FHV series
FZ5-800/1100/1200 series
FZ5-L series/FZ5-600 series
9 - 4
At power
OFF
Retained
Cleared
Cleared
Retained
Sensor Controller
Target data
Settings data
Last input
(system data,
Logged
scene data,
images
and scene
group data)
OK ---
*1
---
OK
*2
OK
OK
FAT32 NTFS
OK
OK
OK
Vision System FH/FHV/FZ5 Series User's Manual (Z365)
Logged
image data Capture
and last (measure- image
NG image ment data)
--- ---
OK OK
exFAT
OK OK
OK ---
--- ---
---
OK