Omron FH-1 series User Manual page 206

5 Creating Measurement Scenes
Adding variables
Variables need to be defined the name and the type before use.
1
On the Edit item tab area in the Edit flow tab screen, click [Scene variable] tab or [System vari-
able] tab.
The Scene variable tab screen or the System variable tab screen is displayed.
The following is an example of the Scene variable tab screen.
2
In the Variable button area, click
The "Add" dialog box is displayed.
Additional Information
The following operation also makes the TDM editor exit and return to the main screen, while
holding the set contents.
• Click [Add] on the displayed shortcut menu of [Scene variable] or [System variable] in the
Menu bar.
• When some variables have already defined, right-click a variable on the column of the vari-
able name and clock [Add] on the displayed shortcut menu.
3
Enter the name of the variable.
Important
Variable names have the following restrictions. The restrictions are applied to both variables:
Scene variables and System variables.
• The first character must be an alphabetic character.
• Alphanumeric characters, "." (Period), and "_" (Underscore) can be used except for the first
character.
• Upper- and lowercase letters are not distinguished. When a lowercase letter is entered, it will
be converted to and displayed as an uppercase one automatically. Therefore, just use upper-
or lowercase letters. e.g. "AA" and "aa" are treated as the same variable.
• Reserved words cannot be used as a variable name. A variable name including a reserved
word however can be used. e.g. "Abs" is one of the reserved words, so that it cannot be used
as a variable name. "Abs_01" however can be used as a variable name. For more details,
refer to List of Reserved Words on Macro Reference List in FH/FHV/FZ5 Series Macro Cus-
tomization Programming Manual (SDNB-721).
5 - 44
[Add].
Vision System FH/FHV/FZ5 Series User's Manual (Z365)