Omron FH-1 series User Manual page 378

8 Setting Windows
Image Button Setting Region
Parameter
Event
Target dialog ID
Data Type
Target data No.
[Data reference]
button
Data ident
Ident 0
Ident 1
Scene variable
System variable
Set value
8 - 84
Set value
[Factory default]
• [Apply and close]
• Close
• Other dialog
• Apply and change dialog
• Change dialog
• Apply
• Get current value
• Set Value
• [Unit data (No.)]
• Unit data (ident)
• System data
• Scene variable
• System variable
Description
Apply and close: Apply the settings and close the
dialog.
Close: Close the dialog.
Other dialog: Open a child window for the new
dialog.
Apply and change dialog: Apply the settings and open the
specified dialog.
Change dialog: Open the specified dialog without
applying the settings.
Apply: Apply the settings.
Get current value: Restore the data before application.
Set value: Set the specified value to the spec-
ified data.
This is available when [Other dialog], [Apply and change dia-
log], or [Change dialog] is selected in the "Event".
When clicking the button, select the ID for the dialog box to launch.
The following items (from here to "System valuable") are avail-
able when [Set value] is selected in the "Event".
Sets the unit specification method for targets for which to carry
out button settings.
The settings details vary depending on specification methods.
This is available when [Unit data (No.)] is selected in the "Data
Type".
Specifies the data to be the target for the button setting.
Enter the data number for the unit that is specified by the "Tar-
get unit No.".
This is available when [Unit data (No.)] is selected in the "Data
Type".
You can select the data number directly to enter it, or you can
enter it with the [Data reference] button.
Click the [Data reference] button to select the target data in the
[Data reference] dialog box.
Sets when [Unit data (ident)] is selected in the "Data Type".
Use the unit data (identifier name) to specify the unit to be the
target for the button setting.
These are available when [System data] is selected in the
"Data Type".
Specifies the system data to be the target for the button setting
using the identifier information 0 and identifier information 1.
(Refer to Vision System FH/FZ5 Series Macro Customize Func-
tions Programming Manual (Cat No. Z367-E1) system data list.)
This is available when [Scene variable)] is selected in the "Data Type".
Specifies the scene variable to be the target for the button set-
ting using the scene variable name.
This is available when [System variable)] is selected in the
"Data Type".
Specifies the system variable to be the target for the button set-
ting using the system variable name.
Sets a value.
Vision System FH/FHV/FZ5 Series User's Manual (Z365)