A-5-5 Handling Coordinates - Omron FH-1 series User Manual

A-5-5 Handling Coordinates
The processing items for measuring positions have a setting item called "Output parameter" with which
you can select how to handle coordinates.
In "Output parameter", you can set "Output coordinates" and "Calibration".
Output Coordinates
Selects coordinate types to be output to external devices.
Example)
Image when setting
+
Reference position
This angle is used as
model for position
compensation
• Before position compensation
Coordinate values before position compensation are output.
X
0
Y
• After position compensation (with factory settings)
Coordinate values after position compensation are output.
X
0
Y
Calibration
Select whether or not to perform calibration when selecting output to external devices.
• Calibration: ON
Calibration is performed during output and measured values after calibration are output.
• Calibration: OFF
Calibration is not performed during output, and coordinate values from camera images are output.
Vision System FH/FHV/FZ5 Series User's Manual (Z365)
Measurement image
Image with position
(image without position
compensation
compensation)
(for left upper deflection)
The area outside of
imaging range is turned
into black
Appendices
A
A - 19