Omron FH-1 series User Manual page 565

Getting an I/O Module Identifier Name
• GetIoModuleIdent
• Parameters
ioModuleNo
• Return value
If the I/O module identifier name is acquired successfully (character string), returns 0.
Otherwise, returns value other than 0.
Getting Security Related Parameters
• GetSecurityParameter
• Parameters
_userName
_password
dataIdent
data
• Return value
If it succeeded, returns 0.
Otherwise, returns value other than 0.
Vision System FH/FHV/FZ5 Series User's Manual (Z365)
I/O module number
0: Registers ParallelIo (Parallel I/O). (Fixed)
1: Registers any of the following I/O modules in the module communication system.
• SerialNormal: Serial non-procedure communication
• SerialNormal2: Serial non-procedure communication (Fxxx series method)
• SerialPlcLink: Serial PLC link (Omron PLC)
• SerialPlcLinkM: Serial PLC link (Mitsubishi PLC)
2: Registers any of the following I/O modules for Ethernet communication system
• TcpNormal: TCP non-procedure communication
• UdpNormal: UDP non-procedure communication
• UdpNormal2: UDP non-procedure communication (FXXX series method)
• UdpPlcLink: UDP PLC link (Omron PLC)
• UdpPlcLinkM: UDP PLC link (Mitsubishi PLC)
• TcpPlcLink: TCP PLC link (Omron PLC)
• TcpPlcLinkM: TCP PLC link (Mitsubishi PLC)
3: Registers one of the following I/O modules or no registration.
• EtherCAT: EtherCAT communication
• EtherNetIP: EtherNet/IP communication
User name executed
User password executed
Data identifier name
userLoginTimeout: Login timeout time (minutes)
Acquisition data storage variable
Appendices
A
A - 47