Omron FH-1 series User Manual page 477

Important
• If the save destination of operation log does not exist or an insufficient memory is available,
the logging operation will fail. In this case, an logging error appears, refer to 11-1 Error Mes-
sages and Troubleshooting on page 11-2.
• The saving the operation log may fail at the Sensor Controller start-up because a recognition
delay for external storage happens depending on models or number of connections of exter-
nal storage.
Use the Device Information Storage Tool when the save destination of operation log is set to
external storage.
Refer to 3-6-2 Device Information Storage Tool on page 3-35.
Checking and Changing the Operation Log Status
Use the following procedure to check the current operation log function status
1
In the Main Window, select [Operation log] from the [Function] menu.
The current operation log status is displayed.
To change the current operation log status, click either [Start] or [Stop].
To close the dialog box without changing the current operation log status, click the [Cancel] but-
ton.
Dialog Box When Operation Log Is Stopped
Loading an Operation Log File
When the log file is set to be saved to the Controller, use the following procedure to load the file.
1
Insert an external storage device into the Controller.
2
In the Main Window, select [Save to file] from the [Function] menu.
The [Save to file] dialog box is displayed.
3
Click the [Copy files] tab.
Vision System FH/FHV/FZ5 Series User's Manual (Z365)
10 Advanced Usage
Dialog Box While Operation Log Is Being Recorded
10
10 - 41