Omron FH-1 series User Manual page 107

For monitor cable of video input or communication cable of Touch Panel, refer to the followings:
 Connection cable for FH-MT12
Cable name
Monitor cable
Touch Panel
cable
When connect the monitor cable, Sensor Controller recognizes Touch Panel Monitor automatically, and
then start to display.
Additional Information
When use only monitor function of Touch Panel Monitor (FH-MT12), confirm the followings:
• You can use both FH series Sensor Controller and FZ5 series Sensor Controller.
• No limitation of software version of FH series/FZ5 series Sensor Controller.
• Not cable for Touch Panel Monitor, but only monitor cable for video.
The setting steps for the touch panel monitor and the communication module are as follows.
1
Connect the Touch Panel Monitor to the FH series Sensor Controller.
2
In the Main Window, click [Tool] - [System Settings] - [Startup] - [Startup setting], then click
[Communication]
3
On the Communication module select area, select [Touch Panel Monitor (FH-MT12)] from the
[Serial (RS-232C/422)].
Vision System FH/FHV/FZ5 Series User's Manual (Z365)
Type
DVI-RGB converter 2 m
cable
5 m
10 m
USB 2 m
5 m
RS-232 2 m
5 m
10 m
Cable length Model
FH-VMDA 2M
FH-VMDA 5M
FH-VMDA 10M
FH-VUAB 2M
FH-VUAB 5M
XW2Z-200PP-1
XW2Z-500PP-1
XW2Z-010PP-1
4 Setting the Controller
Minimum bend radius
36 mm
25 mm
59 mm
4
4 - 9