Omron FH-1 series User Manual page 366

8 Setting Windows
 Individual Setting Region
• Normal Dialog Box Setting Region
Setting item
Dialog width
Dialog height
• Region Setting Dialog Box Setting Region
Setting item
Setting target figure
No.
• Position Setting Dialog Box Setting Region
Setting item
Position X's data No.
Position Y's data No.
[Data reference] button
• Color Extract Dialog Box Setting Region
Setting item
Color R's data No.
Color G's data No.
Color B's data No.
Scattering R's data No. −1 to 999999999
Scattering G's data No. −1 to 999999999
Scattering B's data No. −1 to 999999999
[Data reference] button
8 - 72
Setting value
[Factory default]
100 to 1920
[1024]
100 to 1080
[768]
Setting value
[Factory default]
[0]
Setting value
[Factory default]
−1 to 999999999
[−1]
−1 to 999999999
[−1]
---
Setting value
[Factory default]
−1 to 999999999
[−1]
−1 to 999999999
[−1]
−1 to 999999999
[−1]
[−1]
[−1]
[−1]
---
Description
Sets the width of the dialog box.
Sets the height of the dialog box.
Description
Specifies the figure number for the unit to use for region
setting. The number that you can select depends on the
unit that is specified.
Description
Specifies the data number on the X axis for the unit to use
for position setting.
Specifies the data number on the Y axis for the unit to use
for position setting.
You can select the data number directly to enter it, or you
can enter it with the [Data reference] button.
Click the [Data reference] button to select the target data
in the [Data reference] dialog box.
Description
Specifies the R's data number for the color to specify for
the unit to use for color extraction.
Specifies the G's data number for the color to specify for
the unit to use for color extraction.
Specifies the B's data number for the color to specify for
the unit to use for color extraction.
Specifies the R's data number for the difference in the unit
to use for color extraction.
Specifies the G's data number for the difference in the unit
to use for color extraction.
Specifies the B's data number for the difference in the unit
to use for color extraction.
You can select the data number directly to enter it, or you
can enter it with the [Data reference] button.
Click the [Data reference] button to select the target data
in the [Data reference] dialog box.
Vision System FH/FHV/FZ5 Series User's Manual (Z365)