Omron FH-1 series User Manual page 356

8 Setting Windows
Setting item
Data Type
Text Data
Data Type
(Selected)
Text Data
(Selected)
Font Setting
Size
Style
Color Setting
Initial Setting
Initial Status
Important
• Set subroutine name to specify in [Set operation] in accordance with the following rules.
*+[Single-byte alphabetical character]+[Single-byte alphanumeric character and _ (under-
score)]
Example: *MEASUREDISP
• In [Control setting], if using a macro RaiseOptionEvent to operate, then specify the control
command in the event number, and the control parameters in the parameter.
8 - 62
Setting value
[Factory default]
• [Direct Input] Sets text data to display on the button.
• Variable
Direct input: Directly input to the [Text Data].
Variable:
[Blank] Specifies text data to display on the button using up to 128
characters.
• [Direct Input] Sets text data to display at the button selection.
• Variable
Direct input: Directly input to the [Text Data].
Variable:
[Blank] Specifies text data to display at the button selection using up to
128 characters.
Sets the display font.
1 to 100 [10] Sets the font size.
• Bold Sets the font style.
• Italic
Check the box to set desired style.
• Underline
• Strikeout
• [Fore Color] Sets the font color, background color, and the background color
at selection.
• Back Color
Fore Color:
• Select Color
R: 0 to 255 [16]
Back Color:
G: 0 to 255 [16]
Select Color: Set the button color in selection state.
B: 0 to 255 [16]
Sets the startup default conditions for the custom dialog display
buttons.
• [Active] Sets the button operation enabled or disabled when starting up
the sensor controller.
• Inactive
Description
Specify a system variable or a scene variable of
character string type that defines a character
string to display.
Specify a system variable or a scene variable of
character string type that defines a character
string to display.
Set the character color.
Set the button color in normal state.
Vision System FH/FHV/FZ5 Series User's Manual (Z365)