Omron FH-1 series User Manual page 353

Setting item
Upper limit
(Ident/Number)
Lower limit
(Ident/Number)
Decimal digits
Status
Front/Back
Operation
Macro subroutine
after edit
Control
Control ID
Important
• Set subroutine name to specify in [Operation] in accordance with the following rules.
*+[Single-byte alphabetical character]+[Single-byte alphanumeric character and _ (under-
score)]
Example: *MEASUREDISP
• In [Control], if using a macro RaiseOptionEvent to operate, then specify the control command
in the event number, and the control parameters in the parameter.
Vision System FH/FHV/FZ5 Series User's Manual (Z365)
Setting value
[Factory default]
[Blank] Sets the upper limit/lower limit numerical values that can be
input using up to 32 characters.
The setting contents vary depending on [Data type].
Unit data:
Scene variable or System variable: Variable name
System data or Global data:
0 to 10 [0] Sets the number of digits after the decimal point for the data to
input numerical value.
Sets the window part status.
[Blank] Specifies the variable to store the status of the numerical value
input window from the variable allocation window.
However, only scene variables and system variables can be
specified.
Refer to Assigning variables on page 5-61.
When the variable value is:
Positive: Move the window to the front.
Negative: Move the window to the back.
0:
Sets this when calling a macro subroutine after inputting
numerical values and updating data.
[Blank] This is effective only when [Unit data] is selected in [Data type]
and a macro is specified in [Unit].
Sets this when changing the status of the numerical value input
window using a macro.
0 to 999 [0] The ID used to identify the operation object if using the macro
RaiseOptionEvent relationship to carry out operations.
8 Setting Windows
Description
External reference data
number or identifier name
Identifier name
Do not move the window.
8
8 - 59