Omron FH-1 series User Manual page 370

8 Setting Windows
6
Every time you click an item in the list, that item changes between selected (inverted display)
and not selected.
If only one item is selected (inverted display), the settings for that item type are displayed in the
Edit Item Area.
7
Edit the settings for the item. Some settings are common for all items, and some are specific to
individual items.
Example: Item Properties Display Area for a Numeric Box
Refer to Settings in the Item Properties Display Area on page 8-76 that is described later in this
section for details on all settings.
8
When you have finished editing, click the [OK] button to exit the Edit Dialog Box Window.
 Settings in the Item Properties Display Area
• Common Settings Area
Setting item
Item title
Display position
• Individual Setting Region
Numeric Box Setting Region
Setting item
Data Type
Target unit No.
8 - 76
Setting value
[Factory default]
This is set to a character
string that is not assigned
to any other item in the list
when the item is added.
X: 0 to 1920, [-]
Y: 0 to 1080, [-]
Setting value
[Factory default]
• [Unit data (No)]
• Unit data (ident)
• System data
• Scene variable
• System variable
0 to No. of units in the dis-
play target scene - 1 [0]
Description
To change the title of the dialog box item, click the [...] button
and enter the desired characters.
These are the coordinates of the upper left corner of the dialog
box item. The upper left corner of the dialog box is 0, 0.
The display position is also updated when you drag an item to
a new position in the Design Pane.
Description
Sets the unit specification method for targets for which to carry
out the numeric setting. The setting details vary depending on
the specification method.
This is available when [Unit data (No.)] or [Unit data (ident)] is
selected in the "Data Type".
Specifies the unit to be the target for the numeric setting.
The units that are registered for the scene that is the target of
the normal dialog box will appear in the combo box.
Select the processing unit to set.
Vision System FH/FHV/FZ5 Series User's Manual (Z365)