Troubleshooting - Omron FH-1 series User Manual

10-9-3 Troubleshooting

PLC Master Calibration
Refer to Key Points for Adjustment under PLC Master Calibration in the Vision System FH/FHV/FZ5
Series Processing Item Function Reference Manual (Cat. No. Z341).
Vision Master Calibration
Refer to Key Points for Adjustment under Vision Master Calibration in the Vision System FH/FHV/FZ5
Series Processing Item Function Reference Manual (Cat. No. Z341).
Calibration Support Tool
Symptom
The unit number is set to
[None] and cannot be
selected.
The setting data is initial-
ized every time the Tool-
box is opened.
How do you rotate the
graphic display for bet-
ter visibility?
Vision System FH/FHV/FZ5 Series User's Manual (Z365)
Type Parameters to adjust
---
• Tool Settings Save Button
• Tool Settings Load Button
• Standard axis
• Axis direction
• Direction of rotation
10 Advanced Usage
Correction
Check whether there are any processing
items that retain calibration data that are
registered in the current scene.
This is the specified behavior. If you need to
save the settings data, use the [Save] but-
ton in the Toolbox. The saved settings can
be loaded with the [Load] button.
You can rotate the graphic display along the
standard axis, axis direction, and rotation
direction on the [Display setting] tab page.
10
10 - 59