Omron FH-1 series User Manual page 540

Appendices
Item
Image file 1. Confirm with Sensor
confirma- Controller.
tion
2. Confirm using dedi-
cated tools if you use PC
or confirm to convert IFZ
to other file type using
same tool.
File size ---
Save ---
counts
Processing ---
time
Restrictions If there is insufficient
memory in the logging
destination, the files will
not be created.
Restrictions ---
Restrictions If you save as BMP(BFZ) format, the handling for the area out-
side the image differs from the IFZ file format and emphasizes
ease of display. If you want to perfectly reproduce the mea-
surement processing, including error processing on the out-
side part of the image, save it as IFZ file format.
A - 22
IFZ
1. Confirm with Sensor Controller.
2. Dedicated tools are not neces-
sary if you use PC. Confirm it
using general image display
tools.
This file size will be 3x the size of
the IFZ file type for color images.
For monochrome images, the
size will not differ.
The number of images that can
be saved to an external device
will be less.
The read/write processing time
will be longer for the BMP(BFZ)
file format due to the conversion
to/from the IFZ image file format
in Sensor Controller memory.
If there is insufficient memory for
the logging destination, the BMP
files will not be created, but their
container folder will be created.
• Do not change the names of
any BMP images included in
the BMP(BFZ) file type.
Measurement of loading image
may not be executed when
loads BMP(BFZ) file type.
• If there are camera image input
numbers for the BMP format
files included in the BMP(BFZ)
file type that are out of
sequence, measurement will
not be done on images after
the first out of sequence.
BPM(BFZ)
1.Confirm with Sensor Controller.
2.Special tools are not necessary
when using a PC. They can be
confirmed with general image dis-
play tools.
Jpeg format file size varies
depending on image quality.
The number of files that can be
saved in external storage is larger
than IFZ format, BMP (BFZ) for-
mat.
For the Read/Write time for JPG
(JFZ) format images,there is
some processing time to convert
the image format (IFZ) captured
in the sensor controller to JPG
(JFZ) format.
When the capacity of the logging
destination is insufficient, the JPG
image is not created and only the
folder is created.
• Do not change the name of the-
Jpeg format image file included
in JPG (JFZ) format file. When
loading a JPG (JFZ) format file,
measurement of the loaded
image may not be possible.
• If the Camera Image Input
number of the Jpeg image file
included in the JPG (JFZ) file
format becomes out of
sequence, measurement on
images after the out of
sequence Camera Image Input
number will not be performed.
• The JPG (JFZ) format can be
loaded and measured when the
Sensor Controller software ver-
sion is 5.71 or later. Since it is
an irreversible compression
image format, the measure-
ment result differs from IFZ, or
BMP (BFZ) format.
Vision System FH/FHV/FZ5 Series User's Manual (Z365)
JPG(JFZ)