Omron FH-1 series User Manual page 223

Assigning variables
Assign defined variables to processing units. The method for assigning variables is the same for
both Scene variables and System variables.
1
Click [Scene] tab on the Edit flow screen to select a scene from the displayed list to edit.
A list of scenes is displayed. The current scene has a check mark.
2
Click [Edit flow] tab.
The Edit flow tab screen is displayed.
3
On the Unit list (flow), select a processing unit to assign variables.
4
Click [Set] on the Unit area and click [Open the unit setting UI].
The "Editing" dialog box for the selected processing unit is displayed.
Vision System FH/FHV/FZ5 Series User's Manual (Z365)
5 Creating Measurement Scenes
5
5 - 61