Omron FH-1 series User Manual page 281

Additional Information
• Up to 128 scenes can be handled as one scene group, and up to 32 scene groups can be
set. You can therefore use 128 scenes × 32 scene groups, or 4,096 scenes.
• For the FZ5-L series/FZ5-600 series, the drive name of the USB memory device must be
named "USBDisk" for it to be used as the destination for scene groups 1 to 31. The names
"USBDisk2" to "USBDisk4" cannot be used for saving. When other USB memory devices are
already inserted for the USB disk, perform operations only after removing all USB memory
devices other than the one in which the scene group data is stored.
• If the external storage capacity is insufficient for the data size, 4,096 scenes cannot be set.
The scene data size depends on the settings.
• Check the amount of memory used and free data memory from the menu of Memory Con-
sumption Monitor on the Measurement Management Bar or the System Menu.
Refer to 3-4 Checking the Memory Consumption and Percentage of Memory Used on page
3-31 and 3-3 Checking System Information on page 3-27.
Vision System FH/FHV/FZ5 Series User's Manual (Z365)
7 Increasing/Switching Measurement Scenes
7
7 - 3