Omron FH-1 series User Manual page 103

4 Setting the Controller
Important
*1 For FH series/FZ5-800/1100/1200 series, [Relocate memories] setting is invalid.
*2 Relocate processing could be take time depends on relocated data capacity or data frag-
mentation when [Relocate] is selected.
*3 An error may occur; e.g. data is insufficient because data relocate processing is not carried
out when [Relocate] is selected. For data memory region, refer to A-9 About Memories Usable
with FH series/FZ5 series on page A-29.
4
4 - 5
Vision System FH/FHV/FZ5 Series User's Manual (Z365)