Omron FH-1 series User Manual page 252

6 Performing Measurement and Adjustment
Analyzing Logged Data
Acquired data is referred to and processed, and settings are analyzed.
 Checking Logged Data with a Computer
This section uses the example of saving logging data in USB memory.
1
Copy the logged data in the external storage to the computer.
2
Open the copied data in the folder using an application associated with the extension (.csv).
This procedure describes an example for data displayed in spreadsheet program.
3
Process and analyze the data with a spreadsheet program.
For example, the optimum threshold value can be calculated.
Measurement ID
 Comparing Logged Data and Logged Images
Compare image and measurement data to confirm correctness and to make analyzing trends for when
NG occurs easier.
The measurement data and image data stored with the logging functions are associated through mea-
surement IDs based on the measurement date and time. One image data file contains the Camera
image data of all the connected units.
In this way, measurement data can be made to always correspond with image data.
Verify data with the measurement ID.
Logging data
6 - 22
Result of Result of
Expression 0 Expression 2
Result of Result of
Expression 1 Expression 3
Logging image folder
Threshold values can be determined.
Images are correlated
with measured data via
measurement ID.
Vision System FH/FHV/FZ5 Series User's Manual (Z365)